RONIS key-operated switch, 22 mm, round, metal, shiny, lock number SB30, with 2 keys, 2 switch positions O-I, latching, actuating angle 90°, 10:30h/13:30h, key removal O+I, possible special locks: SB31, 421, 455
Bracket for wall mounting, For double-sided mounting, without foot and pipe, accessory for signaling columns, with diameter 70 mm
Accessory for 3KD size 2 Neutral conductor/ground terminal with fixed jumper flat terminal
Illuminated pushbutton, 30 mm, round, metal, matte, red, front ring for flush installation, momentary contact type
Illuminated pushbutton, 30 mm, round, metal, matte, yellow, front ring for flush installation, momentary contact type
Illuminated pushbutton, 30 mm, round, metal, matte, green, front ring for flush installation, momentary contact type
Indicator lights, 30 mm, round, metal, matte, yellow, front ring for flush installation,
Indicator lights, 30 mm, round, metal, matte, red, front ring for flush installation,
Illuminated pushbutton, 30 mm, round, metal, matte, blue, front ring for flush installation, momentary contact type
Indicator light in illuminated pushbutton design, 30 mm, round, metal, matte, green, Front ring for flush installation
Indicator lights, 30 mm, round, metal, matte, blue, front ring for flush installation,
Indicator lights, 30 mm, round, metal, matte, clear, front ring for flush installation,
locking provision for handle accessory for: 3VA10/11 3VA12
cover frame for door cutout 183.6 x 70.7 mm (WxH) accessory for: circuit breaker, 4-pole without TMTU/ETU access 3VA13/14; 3VA23/24
short circuit alarm switch changeover contacts Type HQ (7 mm) accessory for: 3VA12/13/14
EMERGENCY STOP mushroom pushbutton, illuminable, 22 mm, round, metal, shiny, red, 60 mm, positive latching, acc. to EN ISO 13850, rotate-to-unlatch
Memory module Basic 2 GF for 3RB22/23 Size S00...S12
Industrial Ethernet TP Cord RJ45/RJ45, TP cord pre-assembled with 2 RJ45 plug, length 1 m.
Industrial Ethernet TP XP Cord RJ45/RJ45, TP cord pre-assembled with 2 RJ45 plug, send and receive line crossed, length 1 m.
Wave set mechanism, with shaft set, shaft 8 x 8 mm, length 600 mm, 5 parts, accessory for Main and emergency switching-off switch 3LD23/24 and for molded case switch 3LD5 UL
Miniature circuit breaker 230 V 10kA, 1+N-pole, C, 32 A
terminal cover broadened 3-pole; 1 unit accessory for: 3VA12
Separate actuator, radius actuator left for position switch with tumbler 3SE5312/3SE5322 and AS-i 3SF13 and position switch with separate actuator 3SE51/3SE52 and AS-i 3SF11/3SF12
Separate actuator, radius actuator right for position switch with tumbler 3SE5312/3SE5322 and ASI 3SF13 and position switch with separate actuator 3SE51/3SE52 and ASi 3SF11/3SF12
Position switch Plastic enclosure 40 mm according to EN 50041 Device connection 1 x (M20 x 1.5) 1 NO/1 NC quick action contacts Rounded plunger made of plastic
Miniature circuit breaker 230/400 V 10kA, 1-pole, C, 63 A
Pin busbar touch-safe, 16 mm2 3-phase+AUX, 214 mm long can be cut, with end caps
Load disconnector 3LD3, Iu 25 A Main switch 3-pole Rated operating capacity at AC-23 A at 400V 9.0kW Front plate mounting Basic switch with Central hole mounting 22.5mm Toggle drive black 66x66 mm
Load disconnector 3LD3, Iu 25 A Main switch 3-pole Rated operating capacity at AC-23 A at 400V 9.0kW Front plate mounting Basic switch with Central hole mounting 22.5mm Toggle drive red / yellow 66x66 mm
Dilinizi seçin
No account yet?